钢液定氧测头响应时间和热平衡态

本文分别研究了ＺｒＯ２（ＭｇＯ）固体电解质管头壁厚，参比电极量对定氧测头响应时间的影响，得出了以ＺｒＯ２管头壁厚为０．６０－０．８０ｍｍ，Ｃｒ／Ｃｒ２Ｏ３参比电极加入量为４０－６０ｍｇ所组成的定氧测头响应速度最快，同时采用了“双偶法”对定氧测头在工作过程中的热平衡态进行了研究。结果表明：氧浓差电池中的传热是响应过程的控速步骤，氧电势曲线上峰值的产生是起源于电池中的热平衡态。     

Isolation and purification of BVⅠ-2H from bee venom and analysis of its biological action

The medical use of bee venom for rheumatoid arthritis ( RA ) has a very long tradition. In this study, isolation and purification of polypeptides from bee venom were carried out on sephadex chromatography, heparin sepharose CL-6B chromatography and HPLC. Several fractions were extracted, and their effects on activation of splenocyte and THP-1 cell were studied. The inhibitory fraction was selected for further studies. Finally, BVⅠ-2H that the HPLC elution profiles was a single peak was isolated by C8 column. ESI- MS detection results showed that BVⅠ-2H was a fraction of bee venom, and the molecular weight of the major component was 644.8. BVⅠ-2H could inhibit ConA-induced splenocyte proliferation, IL-1 production and interfere with splenocyte cycle in mice. Moreover, BVⅠ-2H could inhibit PMA-induced TNFα production in THP-1 cells, which was due to its inhibitory effects on TNFα mRNA expression and protein phosphorylation of IκBα. Our studies indicated that BVⅠ-2H was one of the anti-inflammatory components of bee venom.     

器官发育及细胞程序化死亡的基因调节研究

用线虫实验模型系统研究调节器官发育及细胞程序化死亡的基因，且发现这种基因在人体中也存在，这一成果获得了2002年诺贝尔生理学医学奖。“程序性细胞死亡”机理的发现为艾滋病、肿瘤和癌症等疾病的治疗提供了寻找新方法的可能，将在人类战胜疾病过程中发挥重要作用。     

基于改进等分节点法的启发式布局算法

针对集成电路标准单元模式的布局问题，提出了一个全新的基于改进等分节点法的启发式标准单元布局算法(TETP)，该算法在优化布局过程中采用改进的等分节点法寻找单元目标位置，同时结合局部寻优的启发式算法，对MCNC(Microelectronics Centre of North-Carolina)标准单元测试电路进行实验。结果表明，与布局工具Timber Wolf7．0和FengShui相比，电路布局的总线长度分别平均减少了16％和17％。     

脉动流诱发有附着物的板振分析

利用压气机与脉动流发生装置，变流体成脉动流注入到工程中的板壳结构上，使其固体结构部分在脉动流的作用下产生强迫振动，这对工业上分离板壳结构表面固体附着物很有实际意义，以薄板为研究对象，导出了薄板横向振动即弯曲振动微分方程，并着重从理论上分析了分离其上的固体附着物的条件及其各种影响因素。     

A new DFM flow for sub-100nm standard cells

DFM （Design-For-Manufacturability） method, which aims to improve manufacturability of ICs through specific design considerations, is becoming important nowadays. In particular, standard cells now should be designed by DFM method. This paper reports a new DFM flow for sub-100 nm standard cell design with a group of technologies for process modeling, manufacturability simulation and trial RETs. Based on this flow, a set of DFM-friendly 90nm standard cells were designed.     

板型燃料组件内部流场数值分析

为板型燃料组件的设计和实验研究提供参考 ,采用商用流体力学计算程序 CFX5对板型燃料组件内部流场进行了数值模拟 ,以获得各流速下的板间流场。数值计算结果表明 :板型燃料组件不同流道和单一流道内的流速分布基本均匀 ,在 2 0个流道中居中的 3～ 5流道内的流量比其它流道小一些 ,其中中间流道内的流量最小 ,其流量与平均流量的误差小于 10 % ;提梁对其后部速度场的影响较大 ,对其后部压力场的影响很小。当板间水隙的最大加工误差为0 .15 mm时 ,该流道内的流量与流道内平均流量的误差接近10 %。组件进出口差压计算值与实验值比较接近 ,证明了计算结果的可靠性     

石油烃分散液对马粪海胆浮游幼虫的急性毒性效应

为研究石油烃污染对海胆胚胎的急性毒性效应,采用胚胎发育毒性实验方法,分6个质量浓度组(1.0、2.0、4.0、8.0、16.0、32.0 mg/L)分别进行0#柴油和船用燃料油分散液对马粪海胆浮游幼虫发育的急性毒性实验.结果显示,两种油品分散液对胚胎发育至二腕幼虫和四腕幼虫阶段有明显的毒性作用.随着受试液质量浓度的增加,幼虫的体长变短,畸形率及死亡率显著增大.船用燃料油分散液48 h和72h的半数效应浓度(EC50)分别为4.57、2.71 mg/L;0#柴油分散液48 h和72 h的EC50分别为3.39、1.87 mg/L,故0#柴油的毒性大于船用燃料油.     

沥青混凝土拌和站燃料选用中的成本分析

通过对几种燃料的成本分析,比如煤粉、水煤浆和燃油,指出混凝土拌和站在选型过程中应结合自身实际情况选配适合的燃料。